MikroKopter spare

FlightControl with integrated NaviControl plus GPS-Module V4: This is the new autopilot for MikroKopter - precise piloting with 32-bit navigation...

GPS for Flight-Ctrl now with support of the european Galileo systems. GPS receiver of the latest generation with mounted GPS Shield and two...

Hot shoe adapter for Flight-Ctrl V3.0 This allows you to log the exact triggerpositions in seperate Logfile. delivery 1 piece incl. Molex-Kabel...

The MKUSB is an interface to connect the MikroKopter with an Computer via the USB port. Its used for configuration, telemtry and firmware update of...

Adapter for connecting high-current servos to Flight-Ctrl V3.0. There are 2 RECOM-voltage regulators for a max. current of 2A on the circuit board...

Mini adapter for connecting servos to the Flight-Ctrl V3.0. Total current of the power max. 800mA. For stronger servos there is also a Servo adapter...

Cableset for using a 2nd FlightCtrl for redundancy. 1x Y- adapter für RC receiver 3x Molexcable 3pol (11cm) Links more information about...

This is an external compass for connection to the NaviCtrl. This module is used when the compass needs more distance to magnetic interferences. A...

This is control board for controlling Brushless Camera Gimbals (for AlexMos Hardware) The gibmal is directly controled via data bus, so no additional...

This is a laser distance meter SF11/c (range 120m) + I2C bus interface for connection to a Flight-Ctrl 3.0 (firmware from 2.15) The distance data are...

4 ESCs on two boards! Extremely fast brushless controllers version V3 for our MikroKopter IMPORTANT: Use FlightCtrl Firmware V2.02 (or greater),...

PPM version with connection for standard rc receiver / flight controls with ppm outputs 4 ESCs on two boards! Extremely fast brushless controllers...

6 ESCs on one board! Extremely fast brushless controller version V3.5 for our MikroKopter IMPORTANT: Use FlightCtrl Firmware V2.02 (or greater),...

The board is tested and programmed. This version has also a second connection for a second FlightCtrl (for redundancy purpose) power voltage : 10...

8 ESCs on two boards (for Oktos) with heat sink! Extremely fast brushless controllers version V3 for our MikroKopter IMPORTANT: Use FlightCtrl...

8 ESCs on one board! Extremely fast brushless controller version V3 for our MikroKopter IMPORTANT: Use FlightCtrl Firmware V2.02 (or greater),...

PPM version with connection for standard rc receiver / flight controls with ppm outputs 8 ESCs on one board! Extremely fast brushless controller...

This is a mini 8 power distribution set (assembled). It contains a mini pcb and molex connectors. Scope of delivery 1 pcb - assembled Links building...