Your cart is empty
Languages  CategoriesImportant LinksSpecials [more] ASSMANN WSW AWP IDC-Steckverbinder, 6-pol mit Zugenlastung 0,35€ 0,26€ Save: 25% off incl. VAT, plus shipping Partner - ShopsSecurities
 Payment
|
All Products LED stripe WHITE (flexible, water resistant)Water resistant LED strip on a flexible printed circuit board. Light up your Mikrokopter for the dark winter evenings! This can be supplied in... ♦ Ready to ship today 1,00€ Buy Now... more infoincl. VAT, plus shipping  LED stripe YELLOW (flexibel)LED strip on a flexible printed circuit board. Light up your Mikrokopter for the dark winter evenings! This can be supplied in multiple conjoined... ♦ Ready to ship today 0,30€ Buy Now... more infoincl. VAT, plus shipping  Leiterkarte LED Stripe V1.1 (bare pcb)Hierbei handelt es sich um eine unbestückte Leiterkarte zur Ansteuerung von 12 RGB-LEDs. Mit einem kleinen AVR-Mikrocontroller können die... ♦ Ready to ship today 0,49€ Buy Now... more infoincl. VAT, plus shipping  License feature GPS Range plus 1000mWith this license feature, the range for an autonomous GPS navigation is increased by another 1000m around the starting point - in total 2000m... ♦ Ready to ship today 49,00€ Buy Now... more infoincl. VAT, plus shipping  License feature GPS Range unlimitedWith this license feature, the GPS range for an autonomous GPS navigation is increased to unlimited. (Please note that in some countries it is not... ♦ Ready to ship today 499,00€ Buy Now... more infoincl. VAT, plus shipping  License feature Ignore RC LostWith this license feature, the signla loss of a RC receiver is ignored. This means the copter continuies the GPS flight in case of a signal loss.... ♦ Ready to ship today 49,00€ Buy Now... more infoincl. VAT, plus shipping  License feature lib-linkThis license feature a self-compiled firmware for the NaviCtrl can be installed. If you would like to make your own extensions to the NaviCtrl... ♦ Ready to ship today 29,00€ Buy Now... more infoincl. VAT, plus shipping  License feature OEM StringThis license feature an own text instead of "MikroKopter" at the transmitter and Kopter tool is possible. So a kind of "OEM branding" to another name... ♦ Ready to ship today 39,00€ Buy Now... more infoincl. VAT, plus shipping  License feature Parachute sensor inputThis license feature an emergency shutdown of the copter can be activated. This feature is designed for use with a parachute. When activated, the... ♦ Ready to ship today 49,00€ Buy Now... more infoincl. VAT, plus shipping  LiPo 11,1V 3300mAh / 20CHigh current lithium polymer battery High-current plug: Deans 2-Pin Ultra Plug Balancer connector: Kokam Technical data (according to the... ♦ Ready to ship today 69,95€ Buy Now... more infoincl. VAT, plus shipping  LiPo 14,8V 5000mAh / 20C (FLACH) RESTPOSTENHigh current lithium polymer battery - FLAT This is a special flat version. This gives a larger surface area but only at half height - compared to a... ♦ Ready to ship today 59,00€ Buy Now... more infoincl. VAT, plus shipping  LiPo 14,8V 5000mAh / 35C (FLACH)High current lithium polymer battery - FLAT This is a special flat version. This gives a larger surface area but only at half height - compared to a... ♦ SOLD OUT ! 145,00€ Sold Out... more infoincl. VAT, plus shipping  LiPo 14,8V 6600mAh (FLACH)High current lithium polymer battery - FLAT - spare part for ARF 4s12 This is a special flat version. This gives a larger surface area but only at... ♦ SOLD OUT ! 189,00€ Sold Out... more infoincl. VAT, plus shipping  LiPo 22,2V 3300mAh / 20C (FLACH)High current lithium polymer battery - FLAT This is a special flat version. This gives a larger surface area but only at half height - compared to a... ♦ Ready to ship today 99,00€ Buy Now... more infoincl. VAT, plus shipping  LiPo 22,2V 4500mAh / 25C XT90 Antispark (Standard)Hochstrom Lithium Polymer Akku Technische Daten (lt. Hersteller) Kapazität: 4500mAh Spannung: 22.2V (6s) (99Wh) XT90 Antispark Balancer Connector... ♦ Ready to ship today 102,53€ Buy Now... more infoincl. VAT, plus shipping  Lipo connetion cable DEANSLiPo cable with DEANS comp. connector. Technical data cable thickness: 2.5qmm length: about 24cm delivery 1 piece ♦ Ready to ship today Buy Now... more info  Lipo connetion cable XT60LiPo cable with XT60 connector. Technical data cable thickness: 2.5qmm length: about 24cm delivery 1 piece ♦ Ready to ship today Buy Now... more info  Lipo DecouplerWith this decoupler it is more safe to connect two or more Lipos in parallel. It prevents a total power loss in the case that one Lipo makes a... ♦ Ready to ship today 39,00€ Buy Now... more infoincl. VAT, plus shipping  Lipo Decoupler XT60With this decoupler it is more safe to connect two or more Lipos in parallel. It prevents a total power loss in the case that one Lipo makes a... ♦ Ready to ship today 42,90€ Buy Now... more infoincl. VAT, plus shipping  LiPo holder set (GFK)This is a set for a LiPo holder for mounting at the round CenterPlate (for example, Hexa or Okto). The dimensions are optimized for our 4S Lipos with... ♦ Ready to ship today 29,00€ Buy Now... more infoincl. VAT, plus shipping  Lipo-Y-cableLiPo Y-cable with DEANS comp. connector to connect two Lipos at the same time (parallel) IMPORTANT: Use only Lipos with the same technical data.... ♦ Ready to ship today 4,35€ Buy Now... more infoincl. VAT, plus shipping  LipoSaverLipo-Saver for 3 and 4-cell Lipos with simple connection to the balancer-connector If you want to use a Lipo to supply a device like a Monitor, the... ♦ Ready to ship today 19,95€ Buy Now... more infoincl. VAT, plus shipping  MC-26 HoTT Transmitter (incl. GR24) - MK-EditionMK-Edition: inkl. Empfänger GR-24, Sender fertig mit Standard-MK-Konfiguration programmiert, MK spezifische Schalterbeschriftung Die Graupner... ♦ SOLD OUT ! 649,00€ Sold Out... more infoincl. VAT, plus shipping  MC-26 Transmitter desk (MC-16, MC-20, MC-28)Very stable transmitter desk for MC-26/MC-16/MC-20/MC-28 transmitter and video monitor. The perfect ground station for the MikroKopter is realized by... ♦ SOLD OUT ! 149,95€ Sold Out... more infoincl. VAT, plus shipping  Micro SD card 2GB2GB Micro SD card - compatible with NaviCtrl delivered product may differ from the photo Delivery 1 pcs incl. adapter ♦ Ready to ship today 7,49€ Buy Now... more infoincl. VAT, plus shipping  MicroSPS-Lizenz (CO)Mit diesem Controller erwirbt man gleichzeitig eine Lizenz zum kommerziellen Einsatz des MicroSPS-Systems. Im Gegensatz zur nicht-kommerziellen... ♦ Ready to ship today 34,90€ Buy Now... more infoincl. VAT, plus shipping  MicroSPS-Lizenz (NC)Dieser Controller ist zum Einsatz des MicroSPS-Systems in nicht-kommerziellen Anwendungen. Er kann in Verbindung mit der SPS-Ctrl-Platine oder auch... ♦ Ready to ship today 14,90€ Buy Now... more infoincl. VAT, plus shipping  MikroKopter FlyerMikroKopter flyer for FREE Distribute the flyers to curious spectators - it answers questions like: How high? How long? Why? ... Scope of... ♦ Ready to ship today Buy Now... more info  MikroKopter StickerMikroKopter label set Scope of delivery 1 Scheet with 12 stickers metal foil - waterproof ♦ Ready to ship today 0,13€ Buy Now... more infoincl. VAT, plus shipping  Mini CMOS Camera (round) PAL 420TVLMini camera (CMOS) Metall-housing with Molex connector (see photo) The camera can directly be connected to the 5.8GHz Stinger video transmitter.... ♦ Ready to ship today 39,95€ Buy Now... more infoincl. VAT, plus shipping  Mini MK cover - blackMini MK cover for Walkera Spacewalker, Ladybird and so on... Technical data Diameter: 55mm Height: ca. 35 mm Material: ca. 0.15mm Delivery 1 Piece... ♦ Ready to ship today 4,49€ Buy Now... more infoincl. VAT, plus shipping  Mini MK cover - transparentMini MK cover for Walkera Spacewalker, Ladybird and so on... Technical data Diameter: 55mm Height: ca. 35 mm Material: ca. 0.15mm Delivery 1 Piece... ♦ Ready to ship today 4,49€ Buy Now... more infoincl. VAT, plus shipping  Mini-4 power distribution setThis is a mini power distribution set. It contains a mini pcb, a molex connector and a cable Scope of delivery 1 pcb, 1 molex connector, 1 cable... ♦ Ready to ship today 3,90€ Buy Now... more infoincl. VAT, plus shipping  Mini-8 power distributionThis is a mini 8 power distribution set (assembled). It contains a mini pcb and molex connectors. Scope of delivery 1 pcb - assembled Links building... ♦ Ready to ship today 9,90€ Buy Now... more infoincl. VAT, plus shipping  Mini-8 power distribution (pare pcb)This is a mini 8 power distribution pcb. It contains a mini 8(bare) pcb and molex connectors for self assembly. Scope of delivery 1 bare pcb, 8 molex... ♦ Ready to ship today 4,50€ Buy Now... more infoincl. VAT, plus shipping  Mini-Camera mount for SLR1/SL2This is an assembly kit for the Mini CMOS camera at a SLR1 /2 camera holder mount . The camera can be mounted with a fixed orientation or tilt... ♦ Ready to ship today 9,95€ Buy Now... more infoincl. VAT, plus shipping  MK Cap black - size XLCap with MikroKopter logo. Properties Color: black Material: 100% Cotton print: MK logo on the front Scope of delivery 1 piece ♦ Ready to ship today 4,90€ Buy Now... more infoincl. VAT, plus shipping MK Cap black - size LCap with MikroKopter logo. Properties Color: black Material: 100% Cotton print: MK logo on the front Scope of delivery 1 piece ♦ Ready to ship today 4,90€ Buy Now... more infoincl. VAT, plus shipping  MK EASY Okto V3Easy assembling without any soldering ! Motros are already mounted on the riggers. (LED strips are also already installed. The new Okto Combi BL-Ctrl... 1.999,00€ Buy Now... more infoincl. VAT, plus shipping  MK EASY Quadro V3SPECIAL OFFER: Easy Quadro Easy assembling without any soldering ! Motros are already mounted on the riggers. (LED strips are also already installed.... ♦ SOLD OUT ! 999,00€ Sold Out... more infoincl. VAT, plus shipping  MK FlexLander LUniversal Landing Gear in size L for the MikroKopter. The 48g landing gear is extremely stable. The height is approximately 15cm above ground. So it... ♦ Ready to ship today 37,95€ Buy Now... more infoincl. VAT, plus shipping  MK FlexLander MUniversal Landing Gear in size M for the MikroKopte. The 40g landing gear is extremely stable. The height is approximately 10cm above ground.. Scope... ♦ Ready to ship today 29,95€ Buy Now... more infoincl. VAT, plus shipping  MK FlexLander XLUniversal Landing Gear in size XL for the MikroKopter. The 85g landing gear is extremely stable. (for use in HexaKopter or OktoKopter) The height is... ♦ Ready to ship today 44,95€ Buy Now... more infoincl. VAT, plus shipping  MK front plates for MC-32 (Version 1)Laser engraved front panels of anodized aluminum for the MK-standard channel assignment (for MC-32) delivery 2 pieces (1x right, 1x left) for... ♦ Ready to ship today 12,95€ Buy Now... more infoincl. VAT, plus shipping  MK front plates for MC-32 (Version 2)Laser engraved front panels of anodized aluminum for the MK-standard channel assignment (for MC-32) IMPORTANT: New assignment with addional switch... ♦ Ready to ship today 14,95€ Buy Now... more infoincl. VAT, plus shipping  MK GNSS V4 + compass (Redundant)GPS for Flight-Ctrl now with support of the european Galileo systems. GPS receiver of the latest generation with mounted GPS Shield and two... ♦ Ready to ship today 99,00€ Buy Now... more infoincl. VAT, plus shipping  MK GPS V1 (SMD preassembled)This is an MK-LEA4H GPS receiver with u-blox GPS module and a passive antenna. Alternatively, the module can also be operated with an active GPS... ♦ Ready to ship today Buy Now... more info  MK GPS V2.1(assembled)This is an MKGPS receiver with u-blox LEA6S GPS module and a passive antenna. Alternatively, the module can also be operated with an active GPS... ♦ Ready to ship today Buy Now... more info  MK HiLander-26Universal part of a landing gear for the MikroKopter. The Hiland-26 is used in our Okto/Hexa XL kit, too. A part weighs about 27g. The mounting... ♦ Ready to ship today 1,00€ Buy Now... more infoincl. VAT, plus shipping  MK HiSight SLR1Universal camera mount for SLR cameras (like Canon EOS 550 and mechanical comp.) - already assembled The camera can be compensated by tilt servos... ♦ Ready to ship today 299,00€ Buy Now... more infoincl. VAT, plus shipping  MK HiSight SLR2Universal camera mount for bigger SLR cameras (like Canon 5D Mark II and mechanical comp.) - already assembled The camera can be compensated by tilt... ♦ Ready to ship today 349,00€ Buy Now... more infoincl. VAT, plus shipping  MK Okto XL 6S12The OktoXL is almost assembled, only simple mechanical assembly work is required (mounting propellers, landing gear and LiPo holder) (see video) All... 3.999,00€ Buy Now... more infoincl. VAT, plus shipping  MK Polo-Shirt size L - blackPolo-shirt with MikroKopter logo. Properties Color: black Material: 100% Cotton print: small MK logo on the front, large logo on the back ... ♦ Ready to ship today 4,90€ Buy Now... more infoincl. VAT, plus shipping MK Polo-Shirt size M - blackPolo-shirt with MikroKopter logo. Properties Color: black Material: 100% Cotton print: small MK logo on the front, large logo on the back ... ♦ Ready to ship today 4,90€ Buy Now... more infoincl. VAT, plus shipping MK Polo-Shirt size S - blackPolo-shirt with MikroKopter logo. Properties Color: black Material: 100% Cotton print: small MK logo on the front, large logo on the back ... ♦ Ready to ship today 4,90€ Buy Now... more infoincl. VAT, plus shipping MK Polo-Shirt size XL - blackPolo-shirt with MikroKopter logo. Properties Color: black Material: 100% Cotton print: small MK logo on the front, large logo on the back ... ♦ Ready to ship today 4,90€ Buy Now... more infoincl. VAT, plus shipping MK Polo-Shirt size XXL - blackPolo-shirt with MikroKopter logo. Properties Color: black Material: 100% Cotton print: small MK logo on the front, large logo on the back ... ♦ Ready to ship today 4,90€ Buy Now... more infoincl. VAT, plus shipping  MK Propeller mount 0845,1245, 1045/5MK Propeller mount for EPP0845 or EPP1245-Propellers Suitable for MK2832/35, Roxxy (2824-34, 2827-34, 2827-35) and compatible AXI motors This is... ♦ Ready to ship today 7,95€ Buy Now... more infoincl. VAT, plus shipping MK Propeller mount 1045/3MK Propeller mount for EPP1045-Propellers Suitable for MK2832/35, Roxxy (2824-34, 2827-34, 2827-35) and compatible AXI motors This is specifically... ♦ Ready to ship today 7,95€ Buy Now... more infoincl. VAT, plus shipping  MK Propeller mount 5mmMK propeller mount with 5mm hub (M5 winding). (e.g. EPP1245 APC propeller or propeller) Suitable for MK2832/35, Roxxy (2824-34, 2827-34, 2827-35) and... ♦ Ready to ship today 7,95€ Buy Now... more infoincl. VAT, plus shipping  MK Propeller mount 5mm (v2) (MK3638)MK propeller mount with 5mm hub (M5 winding) for our V2 motors with 4 holes. Suitable for MK3638 (V2) Delivery 1 propeller mount and additional... ♦ Ready to ship today 7,95€ Buy Now... more infoincl. VAT, plus shipping MK Propeller mount 5mm (v2) (MK3644)MK propeller mount with 5mm hub (M5 winding) for our V2 motors with 4 holes. Suitable for MK3644 (V2) Delivery 1 propeller mount and additional... ♦ Ready to ship today 7,95€ Buy Now... more infoincl. VAT, plus shipping MK Propeller mount 6mm (v2) (MK3638)MK propeller mount with 6mm hub (M6 winding) for our V2 motors with 4 holes. Suitable for MK3638 (V2) Delivery 1 propeller mount and additional... ♦ Ready to ship today 7,95€ Buy Now... more infoincl. VAT, plus shipping  MK Rigger 545/1.5mm BLACKThis is an anodized Aluminium rigger. Technical Data for motor mounting hole distance: 19mm Dimensions (LxWxH): ca. 545x10x10 mm Thinkness:... ♦ Ready to ship today 18,95€ Buy Now... more infoincl. VAT, plus shipping  MK Rigger 545/1.5mm REDThis is an anodized Aluminium rigger. Technical Data for motor mounting hole distance: 19mm Dimensions (LxWxH): ca. 545x10x10 mm Thinkness:... ♦ Ready to ship today 18,95€ Buy Now... more infoincl. VAT, plus shipping  MK T-Shirt size L - grayT-shirt with MikroKopter logo. Technical data Color: dark gray Finish: Round neck Material: 100% Cotton print: small MK logo on the front,... ♦ Ready to ship today 3,90€ Buy Now... more infoincl. VAT, plus shipping MK T-Shirt size M - grayT-shirt with MikroKopter logo. Technical data Color: dark gray Finish: Round neck Material: 100% Cotton print: small MK logo on the front,... ♦ Ready to ship today 3,90€ Buy Now... more infoincl. VAT, plus shipping MK T-Shirt size S - grayT-shirt with MikroKopter logo. Technical data Color: dark gray Finish: Round neck Material: 100% Cotton print: small MK logo on the front,... ♦ Ready to ship today 3,90€ Buy Now... more infoincl. VAT, plus shipping MK T-Shirt size XL - grayT-shirt with MikroKopter logo. Technical data Color: dark gray Finish: Round neck Material: 100% Cotton print: small MK logo on the front,... ♦ Ready to ship today 3,90€ Buy Now... more infoincl. VAT, plus shipping MK T-Shirt size XXL - grayT-shirt with MikroKopter logo. Technical data Color: dark gray Finish: Round neck Material: 100% Cotton print: small MK logo on the front,... ♦ Ready to ship today 3,90€ Buy Now... more infoincl. VAT, plus shipping  MK USBThe MKUSB is an interface to connect the MikroKopter with an Computer via the USB port. Its used for configuration, telemtry and firmware update of... ♦ Ready to ship today Buy Now... more info  MK USB V3The MKUSB is an interface to connect the MikroKopter with an Computer via the USB port. Its used for configuration, telemtry and firmware update of... ♦ Ready to ship today 14,95€ Buy Now... more infoincl. VAT, plus shipping  MK WI232 V2.0 905-Ch.4 (Kopter)This is a ready assembled and preconfigured WI232 module (9xxMHz) for telemetry transmission (for MikroKopter side) - NOT allowed to use in Germany... ♦ Ready to ship today 89,00€ Buy Now... more infoincl. VAT, plus shipping  MK WI232 V2.0 US- 904-Ch.2 (Kopter)This is a ready assembled and preconfigured WI232 module (904.475MHz) for telemetry transmission (for MikroKopter side) - NOT allowed to use in... ♦ Ready to ship today 89,00€ Buy Now... more infoincl. VAT, plus shipping MK-Hexa XL rigger 355/1.0mm REDThis is an anodized Aluminium rigger as a spare part for the rigger from Hexa XL frame. This is an anodized Aluminium rigger as a spare part for the... ♦ Ready to ship today 4,95€ Buy Now... more infoincl. VAT, plus shipping |
MK Partnershops
Die hier im Shop angebotenen Produkte sind Modellbau-Artikel bzw. Zubehör zum Modellbau und kein Spielzeug im Sinne der Spielzeugrichtlinie 2009/48/EG.
Die Artikel sind für Kinder unter 14 Jahren nicht geeignet. Keine Abgabe an Personen unter 14 Jahren !
Die Artikel sind für Kinder unter 14 Jahren nicht geeignet. Keine Abgabe an Personen unter 14 Jahren !