Your cart is empty
Languages  CategoriesImportant LinksPartner - ShopsSecurities
 Payment
|
All Products MK-Hexa XL rigger 355/1.0mm REDThis is an anodized Aluminium rigger as a spare part for the rigger from Hexa XL frame. This is an anodized Aluminium rigger as a spare part for the... ♦ Ready to ship today 4,95€ Buy Now... more infoincl. VAT, plus shipping  MK-Hexa XL Rigger 355/1.0mm BLACKThis is an anodized Aluminium rigger as a spare part for the rigger from Hexa XL frame. This is an anodized Aluminium rigger as a spare part for the... ♦ Ready to ship today 4,95€ Buy Now... more infoincl. VAT, plus shipping  MK-Hexa XL rigger 355/1.0mm BLUEThis is an anodized Aluminium rigger as a spare part for the rigger from Hexa XL frame. This is an anodized Aluminium rigger as a spare part for the... ♦ Ready to ship today 4,95€ Buy Now... more infoincl. VAT, plus shipping MK-Hexa XL Rigger 355/1.5mm BLACKThis is an anodized Aluminium rigger as a spare part for the short rigger from Okto XL frame. stronger material 1.5mm Technical Data for motor... ♦ Ready to ship today 15,95€ Buy Now... more infoincl. VAT, plus shipping MK-Hexa/Okto2 (short) Alu-Rigger 290/1.0mm BLACKThis is an anodized Aluminium rigger for MK Hexa-frame or as a spare part for the short one of Okto2 frame. It is used for: MK Hexa-Frame Okto2-Frame... ♦ Ready to ship today 4,49€ Buy Now... more infoincl. VAT, plus shipping  MK-Hexa/Okto2 (short) Alu-Rigger 290/1.0mm BLUEThis is an anodized Aluminium rigger MikroKopter frames It is used for: MK Hexa-Frame Okto2-Frame (the short rigger) Quadro-XL-Frame Technical Data ... ♦ Ready to ship today 4,49€ Buy Now... more infoincl. VAT, plus shipping MK-Hexa/Okto2 (short) Alu-Rigger 290/1.0mm REDThis is an anodized Aluminium rigger MikroKopter frames It is used for: MK Hexa-Frame Okto2-Frame (the short rigger) Quadro-XL-Frame Technical Data ... ♦ Ready to ship today 4,49€ Buy Now... more infoincl. VAT, plus shipping MK-Okto Alu-Rigger (small) 175/1.0mm BLACKThis is the small anodized Aluminium rigger for OKTO frames. (not for Okto2!) Technical Data for motor mounting hole distance: 19mm Dimensions... ♦ Ready to ship today 3,95€ Buy Now... more infoincl. VAT, plus shipping MK-Okto Alu-Rigger (small) 175/1.0mm REDThis is the small anodized Aluminium rigger for OKTO frame. (not for Okto2!) Technical Data for motor mounting hole distance: 19mm Dimensions... ♦ Ready to ship today 3,95€ Buy Now... more infoincl. VAT, plus shipping MK-Okto XL rigger 460/1.0mm BLUEThis is an anodized Aluminium rigger as a spare part for the rigger from Okto XL frame. Technical Data for motor mounting hole distance: 19mm ... ♦ Ready to ship today 5,95€ Buy Now... more infoincl. VAT, plus shipping MK-Okto XL Rigger 460/1.0mm BLACKThis is an anodized Aluminium rigger as a spare part for the rigger from Hexa XL frame. Technical Data for motor mounting hole distance: 19mm ... ♦ Ready to ship today 5,95€ Buy Now... more infoincl. VAT, plus shipping MK-Okto XL Rigger 460/1.5mm BLACKThis is an anodized Aluminium rigger as a spare part for the rigger from Hexa XL frame. Stronger material: 1.5mm Technical Data for motor mounting... ♦ Ready to ship today 17,95€ Buy Now... more infoincl. VAT, plus shipping MK-Okto XL rigger 460/1.5mm REDThis is an anodized Aluminium rigger as a spare part for the rigger from Okto XL frame. The material is stronger: 1.5mm Technical Data for motor... ♦ Ready to ship today 17,95€ Buy Now... more infoincl. VAT, plus shipping  MK2832/35This is a 14pol Brushless Outrunner High Torque for Direct Drive This (specially designed for the MikroKopter) black anodized engine has extra-long... ♦ Ready to ship today 29,95€ Buy Now... more infoincl. VAT, plus shipping  MK2832/35 V2VERSION 2 with 5mm propeller mount This is a 14pol Brushless Outrunner High Torque for Direct Drive This (specially designed for the MikroKopter)... ♦ Ready to ship today 29,95€ Buy Now... more infoincl. VAT, plus shipping MK30-Alu-Rigger 175/1.0mm BLACKThis is an anodized Aluminium rigger for small MK30 frames. The hole distance on the motor mount is 19mm and is therefore suitable for Roxxy and... ♦ Ready to ship today 3,99€ Buy Now... more infoincl. VAT, plus shipping MK30-Alu-Rigger 175/1.0mm REDThis is an anodized Aluminium rigger for small MK30 frames. The hole distance on the motor mount is 19mm and is therefore suitable for Roxxy and... ♦ Ready to ship today 3,99€ Buy Now... more infoincl. VAT, plus shipping  MK30-Frameset (anodized)This is a frameset for a standard 30cm MikroKopter (distance between motors) The set consists of four aluminum parts (1x red & 3x black anodized, two... ♦ Ready to ship today 17,90€ Buy Now... more infoincl. VAT, plus shipping  MK3638 5mmVersion 2: compatible to 3 hole carbon propeller - mounting plate has to be ordered separately This is a 14pol Brushless Outrunner High Torque for... ♦ Ready to ship today 59,00€ Buy Now... more infoincl. VAT, plus shipping  MK3640/34 5mmCompatible to 3 hole carbon propeller - mounting plate has to be ordered separately This is a 14pol Brushless Outrunner High Torque for Direct Drive... ♦ SOLD OUT ! 59,00€ Sold Out... more infoincl. VAT, plus shipping MK3644/24 5mmVersion 2: compatible to 3 hole carbon propeller - mounting plate has to be ordered separately This is a 14pol Brushless Outrunner High Torque for... ♦ Ready to ship today 69,00€ Buy Now... more infoincl. VAT, plus shipping MK40-Alu-Rigger 215/1.0mm BLACKThis is an anodized Aluminium rigger for medium MK40 frames. The hole distance on the motor mount is 19mm and is therefore suitable for Roxxy and... ♦ Ready to ship today 4,19€ Buy Now... more infoincl. VAT, plus shipping  MK4010/310This is a high-pole Brushless Outrunner High Torque for Direct Drive This (specially designed for the MikroKopter) black anodized engine has... ♦ SOLD OUT ! 99,95€ Sold Out... more infoincl. VAT, plus shipping MK50-Alu-Ausleger 245/1.0mm SCHWARZDies ist ein eloxierter Aluausleger für einen Standard-MK50-Rahmen. Der Lochabstand zur Motorbefestigung beträgt 19mm und ist damit passend für Roxxy... ♦ Ready to ship today 2,99€ Buy Now... more infoincl. VAT, plus shipping MK50-Alu-Rigger 245/1.0mm REDThis is an anodized Aluminium rigger for MK50 frames. The hole distance on the motor mount is 19mm and is therefore suitable for Roxxy and E-Sky... ♦ Ready to ship today 2,99€ Buy Now... more infoincl. VAT, plus shipping MK50-Alu-Rigger 245/1.0mm BLUEThis is an anodized Aluminium rigger for MK50 frames. The hole distance on the motor mount is 19mm and is therefore suitable for Roxxy and E-Sky... ♦ Ready to ship today 3,99€ Buy Now... more infoincl. VAT, plus shipping  MK50-Frameset (anodized)This is a frameset for a standard 50cm MikroKopter (distance between motors) The set consists of four aluminum parts (1x red & 3x black anodized, two... ♦ Ready to ship today 19,90€ Buy Now... more infoincl. VAT, plus shipping  MK50-Frameset (anodized) BLUEThis is a frameset for a standard 50cm MikroKopter (distance between motors) The set consists of four aluminum parts (1x BLUE & 3x black anodized,... ♦ Ready to ship today 19,90€ Buy Now... more infoincl. VAT, plus shipping  MK8-2500 compactThe MK8-2500 compact is a further development of the proven MK6S12. As a special feature, the MK8-2500 has 4 extendable telescope arms and 12 inch... 3.999,00€ Buy Now... more infoincl. VAT, plus shipping  Molex connetor 5pol SMDMolex connector 5pol SMD Delievery 1 piece passendes Molex-Kabel... ♦ Ready to ship today 1,99€ Buy Now... more infoincl. VAT, plus shipping  Molex video adapterAdapter-pcb for 3pin Molexconnector For connection cables for the 5.8GHz Stinger video transmitter Delivery 1 bare pcb 1 Molexconnector (3pin) ♦ Ready to ship today 0,99€ Buy Now... more infoincl. VAT, plus shipping  Mosfet IPD042P03L3P channel mosfet (spare part for Bl-Ctrl 2.0) Scope of delivery 1 piece ♦ Ready to ship today 1,98€ Buy Now... more infoincl. VAT, plus shipping  Motor angle adapter 2 degWith this adapter you can achieved a small tilt in mounting a motor. This produces a better yaw behavior, if your MikroKopter has a large diameter... ♦ Ready to ship today 2,99€ Buy Now... more infoincl. VAT, plus shipping  Motor angle adapter 3 degWith this adapter you can achieved a small tilt in mounting a motor. This produces a better yaw behavior, if your MikroKopter has a large diameter... ♦ Ready to ship today 2,99€ Buy Now... more infoincl. VAT, plus shipping  Motor Coax-Adapter BLACKWith this adapter you can mount 2 motors in coaxial configuration to a rigger. delivery Adapter and screws for motor mounting. Links more... ♦ Ready to ship today 2,50€ Buy Now... more infoincl. VAT, plus shipping  Motor Coax-Adapter REDWith this adapter you can mount 2 motors in coaxial configuration to a rigger. delivery Adapter and screws for motor mounting. Links more... ♦ Ready to ship today 2,50€ Buy Now... more infoincl. VAT, plus shipping  Mount for JetiBox miniThis is a mount for the JetiBox mini. The connection is simple, just plug it to the transmitter (see photo) The mount is made for MX16, MX22, DX7 and... ♦ Ready to ship today 2,99€ Buy Now... more infoincl. VAT, plus shipping  Nut M2,5 black (plastic)M2,5 - hex nut similar to DIN 34,814 of PA6.6 black delivery 10 pieces ♦ Ready to ship today 0,69€ Buy Now... more infoincl. VAT, plus shipping Nut M3 black (plastic)M3 - hex nut similar to DIN 34,814 of PA6.6 black delivery 10 pieces ♦ Ready to ship today 0,49€ Buy Now... more infoincl. VAT, plus shipping  Okto DeltaPlateThis DeltaPlate is used for the constuction of the MK Okto frame This is a spare part. Technical data Color: black Material: GFK Scope of Delivery 1... ♦ Ready to ship today 0,29€ Buy Now... more infoincl. VAT, plus shipping  Okto DeltaPlate for BuzzerThis DeltaPlate is used for the constuction of the MK Okto frame This is a spare part. Technical data Color: black Material: GFK Scope of Delivery 1... ♦ Ready to ship today 1,60€ Buy Now... more infoincl. VAT, plus shipping  Okto power distribution boardThis is a power distribution printed circuit board for eight BL-Ctrls. The use reduces the wiring effort in building a OktoKopters significantly. The... ♦ Ready to ship today 8,90€ Buy Now... more infoincl. VAT, plus shipping  Okto XL V3 - Combi8 ESCs on one board! Extremely fast brushless controller version V3 for our MikroKopter IMPORTANT: Use FlightCtrl Firmware V2.02 (or greater),... ♦ Ready to ship today 299,00€ Buy Now... more infoincl. VAT, plus shipping  Okto XL V3 - Combi / PPM versionPPM version with connection for standard rc receiver / flight controls with ppm outputs 8 ESCs on one board! Extremely fast brushless controller... ♦ Ready to ship today 299,00€ Buy Now... more infoincl. VAT, plus shipping  Okto XL-Frame set 1.5mmFrameset (with stronger riggers 1.5mm) for the construction of MK OktoKopter XL. Technical Data Weight: about 570g delivery Riggers 460mm (1... ♦ Ready to ship today 219,95€ Buy Now... more infoincl. VAT, plus shipping  Okto XL-Frame set Blue EditionFrameset for the construction of MK OktoKopter XL. (this part is also included in the OktoXL -complete set blue edition) Technical Data Weight:... ♦ Ready to ship today 59,95€ Buy Now... more infoincl. VAT, plus shipping  Okto-Frame setFrameset for the construction of MK OktoKopter. (this part is also included in the Okto-complete set) Technical Data Weight: 420g delivery 4... ♦ Ready to ship today 59,00€ Buy Now... more infoincl. VAT, plus shipping  Okto2 Centerplate (Carbon)This Centerplate can be used to build a Quadro, Octo or Octo2 frame- not for a Hexa frame You will need two of these Centerplates for a frame.... ♦ Ready to ship today 29,95€ Buy Now... more infoincl. VAT, plus shipping  Okto2 Centerplate (GFK)This Centerplate can be used to build a Quadro, Octo or Octo2 frame- not for a Hexa frame You will need two of these Centerplates for a frame.... ♦ Ready to ship today 4,95€ Buy Now... more infoincl. VAT, plus shipping Okto2-Alu-Rigger (long) 390/1.0mm BLACKThis is an anodized Aluminium rigger as a spare part for the long rigger from Okto2 frame. Technical Data for motor mounting hole distance: 19mm ... ♦ Ready to ship today 4,95€ Buy Now... more infoincl. VAT, plus shipping Okto2-Alu-Rigger (long) 390/1.0mm REDThis is an anodized Aluminium rigger as a spare part for the long rigger from Okto2 frame. Technical Data for motor mounting hole distance: 19mm ... ♦ Ready to ship today 5,49€ Buy Now... more infoincl. VAT, plus shipping  Okto2-Frame setFrameset for the construction of MK OktoKopter. (this part is also included in the Okto-complete set) Technical Data Weight: 375g delivery 4... ♦ Ready to ship today 59,00€ Buy Now... more infoincl. VAT, plus shipping  Pinheader 1x50pol, gold-plated, straightPin header, 1 rows, 1 x 50 pin, straight, gold-plated RM: 2.54mm Scope of delivery 1 piece ♦ Ready to ship today Buy Now... more info  Pinheader 2x50pol, gold-plated, straightPin header, 2 rows, 2 x 50 pin, straight, gold-plated RM: 2.54mm Scope of delivery 1 piece ♦ Ready to ship today Buy Now... more info  Pinheader 2x5pol, gold-plated, straightPin header, 2 rows, 2 x 5 pin, straight, gold-plated RM: 2.54mm Scope of delivery 1 piece ♦ Ready to ship today Buy Now... more info  Pressure sensor MPX 4115AManufacturer: Freescale Semiconductor (formerly Motorola) This sensor is used for the altitude control of MikroKopter. Specifications: Supply: ... ♦ Ready to ship today 9,95€ Buy Now... more infoincl. VAT, plus shipping  Propeller 10x3.5 CFK - leftLight and stiff propeller made from CFK (handmade) Balanced and with polished surface Technical data Diameter: 10'' (25,4cm) Slope: 3,5'' (8,9cm)... ♦ Ready to ship today 44,95€ Buy Now... more infoincl. VAT, plus shipping Propeller 10x3.5 CFK - rightLight and stiff propeller made from CFK (handmade) Balanced and with polished surface Technical data Diameter: 10'' (25,4cm) Slope: 3,5'' (8,9cm)... ♦ Ready to ship today 44,95€ Buy Now... more infoincl. VAT, plus shipping Propeller 12x3.8 CFK - leftLight and stiff propeller made from CFK (handmade) Balanced and with polished surface Technical data Diameter: 12'' (30,48cm) Slope: 3,8'' (9,7cm)... ♦ Ready to ship today 44,95€ Buy Now... more infoincl. VAT, plus shipping  Propeller 12x3.8 CFK - rightLight and stiff propeller made from CFK (handmade) Balanced and with polished surface Technical data Diameter: 12'' (30,48cm) Slope: 3,8'' (9,7cm)... ♦ Ready to ship today 44,95€ Buy Now... more infoincl. VAT, plus shipping Propeller 12x4.5 CFK - leftLight and stiff propeller made from CFK (handmade) Balanced and with polished surface Technical data Diameter: 12'' (30,48cm) Slope: 4,5'' (11,4cm)... ♦ Ready to ship today 49,95€ Buy Now... more infoincl. VAT, plus shipping Propeller 12x4.5 CFK - rightLight and stiff propeller made from CFK (handmade) Balanced and with polished surface Technical data Diameter: 12'' (30,48cm) Slope: 4,5'' (11,4cm)... ♦ Ready to ship today 49,95€ Buy Now... more infoincl. VAT, plus shipping Propeller 13x4.2 CFK - leftLight and stiff propeller made from CFK (handmade) Balanced and with polished surface Technical data Diameter: 13'' Slope: 4,2'' Bore: 5 mm Weight:... ♦ SOLD OUT ! 54,95€ Sold Out... more infoincl. VAT, plus shipping Propeller 13x4.2 CFK - rightLight and stiff propeller made from CFK (handmade) Balanced and with polished surface Technical data Diameter: 13'' Slope: 4,2'' Bore: 5mm Weight:... ♦ SOLD OUT ! 54,95€ Sold Out... more infoincl. VAT, plus shipping Propeller 14x4.5 CFK - leftLight and stiff propeller made from CFK (handmade) Balanced and with polished surface Technical data Diameter: 14'' (35,56cm) Slope: 4,5'' (11,4cm)... ♦ Ready to ship today 54,95€ Buy Now... more infoincl. VAT, plus shipping Propeller 14x4.5 CFK - rightLight and stiff propeller made from CFK (handmade) Balanced and with polished surface Technical data Diameter: 14'' (35,56cm) Slope: 4,5'' (11,4cm)... ♦ Ready to ship today 54,95€ Buy Now... more infoincl. VAT, plus shipping Propeller 15x5 CFK - leftLight and stiff propeller made from CFK (handmade) Balanced and with polished surface Technical data Diameter: 15'' (38,1cm) Slope: 5,5'' (12.7cm)... ♦ Ready to ship today 54,95€ Buy Now... more infoincl. VAT, plus shipping Propeller 15x5 CFK - rightLight and stiff propeller made from CFK (handmade) Balanced and with polished surface Technical data Diameter: 15'' (38.1cm) Slope: 5'' (12.7cm)... ♦ Ready to ship today 54,95€ Buy Now... more infoincl. VAT, plus shipping Propeller 16x5.5 CFK - leftLight and stiff propeller made from CFK (handmade) Balanced and with polished surface Technical data Diameter: 16'' (40.64cm) Slope: 5,5'' (14cm)... ♦ SOLD OUT ! 59,50€ Sold Out... more infoincl. VAT, plus shipping Propeller 16x5.5 CFK - rightLight and stiff propeller made from CFK (handmade) Balanced and with polished surface Technical data Diameter: 16'' (40.64cm) Slope: 5,5'' (14cm)... ♦ SOLD OUT ! 59,50€ Sold Out... more infoincl. VAT, plus shipping  Propeller pair EPP0845EPP0845 propeller pair Right-and left-rotating propeller We have also specially manufactured propeller mounts in the shop. Technical Data Diameter:... ♦ Ready to ship today Buy Now... more info Propeller pair EPP0845 CFThis version uses chopped glas fiber. This makes the propeller stiffer, but also more brittle. EPP0845 propeller pair Right-and left-rotating... ♦ Ready to ship today Buy Now... more info  Propeller pair EPP1045 / 3EPP1045 propeller pair Right-and left-rotating propeller We have also specially manufactured propeller mounts in the shop. Technical Data Diameter:... ♦ Ready to ship today Buy Now... more info Propeller pair EPP1045 / 5mm NYThis version uses chopped glas fiber and nylon. This makes the propeller stiffer. EPP1045 propeller pair with 5mm hole Right-and left-rotating... ♦ Ready to ship today 2,18€ Buy Now... more infoincl. VAT, plus shipping Propeller pair EPP1045 NYThis version uses chopped glas fiber and nylon. This makes the propeller stiffer. EPP1045 propeller pair Right-and left-rotating propeller We have... ♦ Ready to ship today 2,18€ Buy Now... more infoincl. VAT, plus shipping |
MK Partnershops
Die hier im Shop angebotenen Produkte sind Modellbau-Artikel bzw. Zubehör zum Modellbau und kein Spielzeug im Sinne der Spielzeugrichtlinie 2009/48/EG.
Die Artikel sind für Kinder unter 14 Jahren nicht geeignet. Keine Abgabe an Personen unter 14 Jahren !
Die Artikel sind für Kinder unter 14 Jahren nicht geeignet. Keine Abgabe an Personen unter 14 Jahren !